Error 5B00 on Canon printers Pixma MP140 to MP970

Error 5B00 on Canon printers Pixma MP140 to MP970

Procedure for MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970.


Solution:
• Turn off the printer
• Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.

• Hold the Power Button, release the Resume Button.
• Not releasing the Power Button, double click “Resume” and release .
• Click “Resume” for Four times
• Once you click “Power”.
Location: United Kingdom

Comments

Post a Comment

Popular posts from this blog

Error code 5.155.55 on Canon printers

Error code 5.155.55 on Canon printers Error code 5,155,55 , is a communication error between the scanner and the computer. This error could appears with Canon, Brother, HP, Epson printers... Solution 1: • Power off and unplug the printer from the computer. • Uninstall the Canon software. • Restart the computer and download the last Canon driver • Install the driver and restart Windows • Reconnect the printer and switch it on. Solution 2: • Check for the USB cable: it must be connected to the back of the printer. • Try another USB cable.
Read more

Error 6000 or P03 on Canon printers

Error 6000 or P03 on Canon printers That is a line feed error. It also should be flashing 3 times for this error on the on/off button. Solution 1: • Verify that the paper tray is correctly set. • If any object is placed in front of the machine. Solution 2: • Search for any small pieces of paper in the printer, or a tiny object. Solution 3: • Power off the printer • Wait Solution 4: one of these parts could be faulty: • Timing sensor unit QM2-2683 • Timing slit disk film QC1-6229 • Feed roller ass'y QL2-0925 • Platten unit QM2-2923 • Logic board ass'y QM2-3078
Read more

Error code 6A80 on Canon printers

Error code 6A80 on Canon printers Solution 1: • Switch the printer OFF • Press buttons 1 + 2 + 3 and 4 (simultaneously using four fingers) • Keep pressing this four buttons • Release the On/Off button (number 4) • After a few seconds (when the printer go ON), Solution 2 (Thanks to Dick): • I discovered that the head was blocked from moving all the way to the right by a white nylon lever and discovered that there was a thin, small pad that had come loose and was blocking the mechanism to activate the head motion. • One pad was about 1/2 inch by 1/2 inch and a second was a narrow 3/32 x 1/2 inch pad both about 1/16 thick. • I removed these pads and the printer returned to normal
Read more