Error 6000 or P03 on Canon printers

Error 6000 or P03 on Canon printers


That is a line feed error. It also should be flashing 3 times for this error on the on/off button.


• Verify that the paper tray is correctly set.
• If any object is placed in front of the machine.

Solution 2:

• Search for any small pieces of paper in the printer, or a tiny object.

• Power off the printer
• Wait


Solution 4: one of these parts could be faulty:
• Timing sensor unit QM2-2683
• Timing slit disk film QC1-6229
• Feed roller ass'y QL2-0925
• Platten unit QM2-2923
• Logic board ass'y QM2-3078

Comments

Post a Comment

Popular posts from this blog

Error code 5.155.55 on Canon printers

Error code 5.155.55 on Canon printers Error code 5,155,55 , is a communication error between the scanner and the computer. This error could appears with Canon, Brother, HP, Epson printers... Solution 1: • Power off and unplug the printer from the computer. • Uninstall the Canon software. • Restart the computer and download the last Canon driver • Install the driver and restart Windows • Reconnect the printer and switch it on. Solution 2: • Check for the USB cable: it must be connected to the back of the printer. • Try another USB cable.
Read more

Error code 6A80 on Canon printers

Error code 6A80 on Canon printers Solution 1: • Switch the printer OFF • Press buttons 1 + 2 + 3 and 4 (simultaneously using four fingers) • Keep pressing this four buttons • Release the On/Off button (number 4) • After a few seconds (when the printer go ON), Solution 2 (Thanks to Dick): • I discovered that the head was blocked from moving all the way to the right by a white nylon lever and discovered that there was a thin, small pad that had come loose and was blocking the mechanism to activate the head motion. • One pad was about 1/2 inch by 1/2 inch and a second was a narrow 3/32 x 1/2 inch pad both about 1/16 thick. • I removed these pads and the printer returned to normal
Read more